Eight chairs fit along each long side at 24 inches apiece, 16 seats; at 30 inches each, with a chair at each end, it seats 14. Plan on about 24 by 12 1/2 feet with 48 inches between the table edge and the walls, so chairs pull out and people can walk behind them.
This Y-leg base conference table stands on four legs in silver powder coat: a Y-shaped leg at each end, and every leg between them is a double T-leg. The legs are 2 and 1/4 inch steel tube columns, welded to the plates that carry the top, on cast aluminum feet. The feet of each Y-leg spread 41 and 1/2 inches across the depth, so they stand about 6 inches in from each long edge of the top. Two aluminum stretchers run between each leg and the next, and leveling glides are included, so you can set the table level on an uneven floor.
Each leg column is hollow with a wire chase inside, so a cord from the top can run down inside a leg to the floor. Pick one to three power grommets on this page and they are cut into the top before it ships, placed clear of the legs. Up to three matching credenzas are picked on this page and built with the table.